{
  "revision": 17,
  "geometry": "v15 exacta; no modificada",
  "units": "mm",
  "coordinate_system": "X ancho, Y profundidad (frente negativo), Z altura",
  "part_count": 154,
  "families": 34,
  "scope": "Rayos sobre triángulos reales para48accesos; envolvente conservadoraAABB60x60x250mm para12trayectos de placa. No hay geometría de tornillo real; no se aprueba resistencia ni todas las orientaciones posibles.",
  "plate_dimensions": "300x50 envelope and4thickness are illustrative study, not fabrication dimensions; axes45mm are visual and not selected screws.",
  "findings": [
    {
      "id": "F01",
      "severity": "bloquea atornillado directo en conjunto cerrado",
      "parts": [
        [
          "LONG_FRONT_-1",
          "OPENING_FRONT_H_-1",
          "SKIN_RAIL_02_0"
        ],
        [
          "LONG_FRONT_-1",
          "OPENING_FRONT_H_+1",
          "SKIN_RAIL_04_0"
        ],
        [
          "LONG_FRONT_+1",
          "OPENING_FRONT_H_-1",
          "SKIN_RAIL_02_1"
        ],
        [
          "LONG_FRONT_+1",
          "OPENING_FRONT_H_+1",
          "SKIN_RAIL_04_1"
        ]
      ],
      "fact": "Cuatro cruces delanteros tienen vigas opuestas sobre el mismo montante. La entrada axial X queda tapada por el larguero lateral.",
      "correction": "Placa superficial interior o conector comercial diseñado, fijado en Y a fibra lateral antes de mesa/piel. Sin modificar las154maderas.",
      "status": "Propuesta geométrica; se requiere cálculo/ficha de placa y tornillos."
    },
    {
      "id": "F02",
      "severity": "orden obligatorio",
      "parts": [
        "DEPTH_01",
        "DEPTH_10",
        "DEPTH_11",
        "DEPTH_20",
        "DEPTH_02",
        "DEPTH_19",
        "BRACE_REAR_-1",
        "BRACE_REAR_+1",
        "SUPPORT_REAR_45",
        "SUPPORT_REAR_2955"
      ],
      "fact": "Cuatro separadores tienen el acceso Y posterior tapado por los enlaces4x4; otros dos(DEPTH02/19) por las riostrasV.",
      "correction": "Fijar dichos separadores antes de colocar enlaces y riostras posteriores; reservar acceso lateral si habrá desmontaje posterior. No convertir la secuencia en garantía de resistencia."
    },
    {
      "id": "F03",
      "severity": "orden obligatorio",
      "parts": [
        "TABLE_BEAM_-275",
        "OPENING_FRONT_H_-1"
      ],
      "fact": "La envolvente de herramienta60x60x250mm en las uniones interiores inferiores intercepta TABLE_BEAM_-275 después de colocar la mesa.",
      "correction": "Fijar placas del marco central antes de vigas de mesa. Para mantenimiento posterior retirar vigas/tablero si la herramienta real no entra."
    },
    {
      "id": "F04",
      "severity": "herrajes sin patrón verificable",
      "parts": [
        "H3 convexa",
        "H3 cóncava"
      ],
      "fact": "Brazo100mm cruza pieza70mm y deja30mm de apoyo útil longitudinal en dos piezas. Esto no valida ni posición de agujero ni distancia a testa.",
      "correction": "Medir perfil/huecos y tornillo; prototipo1:1 con70mm reales. Considerar brazo mayor o escuadra simple adicional. No perforar basándose en círculos ilustrativos."
    },
    {
      "id": "F05",
      "severity": "encaje no resuelto",
      "parts": [
        "8 H3 cóncavas en entrantes"
      ],
      "fact": "El entrante del contorno no equivale a un rincón interior de tres caras; DEPTH ocupa otra posición. La pieza se presenta160mm fuera de su nudo.",
      "correction": "Mantener cóncava como estudio; evaluar convexa en esquina opuesta desplazada70mmX+70mmZ, con ensayo de fijación. No comprar/fabricar8cóncavas sin replanteo."
    },
    {
      "id": "F06",
      "severity": "interferencia acero/piel",
      "parts": [
        "H3 delanteras",
        "FACADE_*"
      ],
      "fact": "Espesor ilustrativo4mm exterior coincide con volumen de tablas enY−400..−380.",
      "correction": "Rebaje local o separador calculado y documentado antes de cortar piel; desmontabilidad. No se ha modificado madera ni presupuesto para fingir solución."
    },
    {
      "id": "F07",
      "severity": "diseño de unión requerido",
      "parts": [
        "BRACE_DEPTH_*",
        "BRACE_TABLE_*",
        "BRACE_REAR_*",
        "TABLE_ARM_*",
        "POST_*"
      ],
      "fact": "Hay apoyo geométrico pero no fijaciones dimensionadas. Los nudos diagonales no quedan cubiertos por las H3.",
      "correction": "Escuadras/placas de caras accesibles, fijadas antes del cierre; comprobar doble acceso si se eligen pernos. Unión central de V posterior requiere detalle propio."
    },
    {
      "id": "F08",
      "severity": "montaje modular incompleto",
      "parts": [
        "4 módulos laterales",
        "2 caras completas"
      ],
      "fact": "Las piezas continuas3m se preservan. Partir por ejes centrales no debe cortar estos montantes. El transporte tiene peso/volumen aún por pesar.",
      "correction": "Preferir2caras planas completas si camión y manipulación lo admiten.4laterales reducen ancho pero agregan empalmes de campo; etiquetar y rigidizar temporalmente ambos."
    }
  ],
  "plate_nodes": [
    {
      "id": "CRUCE--1--1",
      "kind": "plate_proposal",
      "parts": [
        "LONG_FRONT_-1",
        "OPENING_FRONT_H_-1",
        "SKIN_RAIL_02_0"
      ],
      "position_mm": [
        -532.1077504725898,
        -308,
        898.946124763705
      ],
      "normal": [
        0,
        1,
        0
      ],
      "size_mm": [
        300,
        4,
        50
      ],
      "visualThicknessOnly": true,
      "status": "Propuesta de acceso; placa, perforaciones y tornillos a dimensionar",
      "face_mm": -310,
      "screw_axes_visual_only": [
        {
          "head_mm": [
            -637.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        },
        {
          "head_mm": [
            -532.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        },
        {
          "head_mm": [
            -427.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        }
      ],
      "sequence": "Antes de TABLE_BEAM_-275, mesa, piel y cierre de módulos",
      "blocked_X_approach": {
        "origin_mm": [
          -567.1077504725898,
          -345,
          897.8922495274102
        ],
        "direction": [
          -1,
          0,
          0
        ],
        "length_examined_mm": 550,
        "hits": [
          {
            "ID": "SKIN_RAIL_02_0",
            "first_hit_mm": 0.05,
            "starts_inside": true
          },
          {
            "ID": "FRAME_FRONT_02",
            "first_hit_mm": 497.108
          }
        ]
      }
    },
    {
      "id": "CRUCE--1-+1",
      "kind": "plate_proposal",
      "parts": [
        "LONG_FRONT_-1",
        "OPENING_FRONT_H_+1",
        "SKIN_RAIL_04_0"
      ],
      "position_mm": [
        -532.1077504725898,
        -308,
        2101.053875236295
      ],
      "normal": [
        0,
        1,
        0
      ],
      "size_mm": [
        300,
        4,
        50
      ],
      "visualThicknessOnly": true,
      "status": "Propuesta de acceso; placa, perforaciones y tornillos a dimensionar",
      "face_mm": -310,
      "screw_axes_visual_only": [
        {
          "head_mm": [
            -637.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        },
        {
          "head_mm": [
            -532.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        },
        {
          "head_mm": [
            -427.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        }
      ],
      "sequence": "Antes de TABLE_BEAM_-275, mesa, piel y cierre de módulos",
      "blocked_X_approach": {
        "origin_mm": [
          -567.1077504725898,
          -345,
          2102.10775047259
        ],
        "direction": [
          -1,
          0,
          0
        ],
        "length_examined_mm": 550,
        "hits": [
          {
            "ID": "SKIN_RAIL_04_0",
            "first_hit_mm": 0.05,
            "starts_inside": true
          },
          {
            "ID": "FRAME_FRONT_04",
            "first_hit_mm": 497.108
          }
        ]
      }
    },
    {
      "id": "CRUCE-+1--1",
      "kind": "plate_proposal",
      "parts": [
        "LONG_FRONT_+1",
        "OPENING_FRONT_H_-1",
        "SKIN_RAIL_02_1"
      ],
      "position_mm": [
        532.1077504725898,
        -308,
        898.946124763705
      ],
      "normal": [
        0,
        1,
        0
      ],
      "size_mm": [
        300,
        4,
        50
      ],
      "visualThicknessOnly": true,
      "status": "Propuesta de acceso; placa, perforaciones y tornillos a dimensionar",
      "face_mm": -310,
      "screw_axes_visual_only": [
        {
          "head_mm": [
            427.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        },
        {
          "head_mm": [
            532.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        },
        {
          "head_mm": [
            637.1077504725898,
            -306,
            898.946124763705
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": [
            "TABLE_BEAM_-275"
          ]
        }
      ],
      "sequence": "Antes de TABLE_BEAM_-275, mesa, piel y cierre de módulos",
      "blocked_X_approach": {
        "origin_mm": [
          567.1077504725898,
          -345,
          897.8922495274102
        ],
        "direction": [
          1,
          0,
          0
        ],
        "length_examined_mm": 550,
        "hits": [
          {
            "ID": "SKIN_RAIL_02_1",
            "first_hit_mm": 0.05,
            "starts_inside": true
          },
          {
            "ID": "FRAME_FRONT_09",
            "first_hit_mm": 497.108
          }
        ]
      }
    },
    {
      "id": "CRUCE-+1-+1",
      "kind": "plate_proposal",
      "parts": [
        "LONG_FRONT_+1",
        "OPENING_FRONT_H_+1",
        "SKIN_RAIL_04_1"
      ],
      "position_mm": [
        532.1077504725898,
        -308,
        2101.053875236295
      ],
      "normal": [
        0,
        1,
        0
      ],
      "size_mm": [
        300,
        4,
        50
      ],
      "visualThicknessOnly": true,
      "status": "Propuesta de acceso; placa, perforaciones y tornillos a dimensionar",
      "face_mm": -310,
      "screw_axes_visual_only": [
        {
          "head_mm": [
            427.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        },
        {
          "head_mm": [
            532.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        },
        {
          "head_mm": [
            637.1077504725898,
            -306,
            2101.053875236295
          ],
          "direction": [
            0,
            -1,
            0
          ],
          "drawn_length_mm": 45,
          "approach_collisions_after_all_wood": []
        }
      ],
      "sequence": "Antes de TABLE_BEAM_-275, mesa, piel y cierre de módulos",
      "blocked_X_approach": {
        "origin_mm": [
          567.1077504725898,
          -345,
          2102.10775047259
        ],
        "direction": [
          1,
          0,
          0
        ],
        "length_examined_mm": 550,
        "hits": [
          {
            "ID": "SKIN_RAIL_04_1",
            "first_hit_mm": 0.05,
            "starts_inside": true
          },
          {
            "ID": "FRAME_FRONT_07",
            "first_hit_mm": 497.108
          }
        ]
      }
    }
  ],
  "probes": [
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_FRONT_H_-1",
      "side": -1,
      "origin_mm": [
        -567.1077504725898,
        -344.9999988079071,
        897.8922665119171
      ],
      "direction": [
        -1,
        0,
        0
      ],
      "hits": [
        {
          "ID": "SKIN_RAIL_02_0",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_FRONT_H_-1",
      "side": 1,
      "origin_mm": [
        567.1077504725898,
        -344.9999988079071,
        897.8922665119171
      ],
      "direction": [
        1,
        0,
        0
      ],
      "hits": [
        {
          "ID": "SKIN_RAIL_02_1",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_FRONT_H_+1",
      "side": -1,
      "origin_mm": [
        -567.1077504725898,
        -344.9999988079071,
        2102.1077632904053
      ],
      "direction": [
        -1,
        0,
        0
      ],
      "hits": [
        {
          "ID": "SKIN_RAIL_04_0",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_FRONT_H_+1",
      "side": 1,
      "origin_mm": [
        567.1077504725898,
        -344.9999988079071,
        2102.1077632904053
      ],
      "direction": [
        1,
        0,
        0
      ],
      "hits": [
        {
          "ID": "SKIN_RAIL_04_1",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_BACK_H_-1",
      "side": -1,
      "origin_mm": [
        -567.1077504725898,
        365.00000953674316,
        897.8922665119171
      ],
      "direction": [
        -1,
        0,
        0
      ],
      "hits": [],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_BACK_H_-1",
      "side": 1,
      "origin_mm": [
        567.1077504725898,
        365.00000953674316,
        897.8922665119171
      ],
      "direction": [
        1,
        0,
        0
      ],
      "hits": [],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_BACK_H_+1",
      "side": -1,
      "origin_mm": [
        -567.1077504725898,
        365.00000953674316,
        2102.1077632904053
      ],
      "direction": [
        -1,
        0,
        0
      ],
      "hits": [],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "opening_endgrain_approach",
      "part": "OPENING_BACK_H_+1",
      "side": 1,
      "origin_mm": [
        567.1077504725898,
        365.00000953674316,
        2102.1077632904053
      ],
      "direction": [
        1,
        0,
        0
      ],
      "hits": [],
      "meaning": "Only centerline approach tested; end-grain fixing not prescribed."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_01",
      "face": "FRONT",
      "origin_mm": [
        -532.1077406406403,
        -380,
        35.00000014901161
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_-1_+5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_01",
      "face": "BACK",
      "origin_mm": [
        -532.1077406406403,
        400,
        35.00000014901161
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "SUPPORT_REAR_45",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_02",
      "face": "FRONT",
      "origin_mm": [
        -532.1077406406403,
        -380,
        400.7844924926758
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_-1_+3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_02",
      "face": "BACK",
      "origin_mm": [
        -532.1077406406403,
        400,
        400.7844924926758
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "BRACE_REAR_-1",
          "first_hit_mm": 10.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_03",
      "face": "FRONT",
      "origin_mm": [
        -1099.2155075073242,
        -380,
        400.7844924926758
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_-1_+0",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_03",
      "face": "BACK",
      "origin_mm": [
        -1099.2155075073242,
        400,
        400.7844924926758
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_04",
      "face": "FRONT",
      "origin_mm": [
        -1099.2155075073242,
        -380,
        967.8922593593597
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_-1_-3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_04",
      "face": "BACK",
      "origin_mm": [
        -1099.2155075073242,
        400,
        967.8922593593597
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_05",
      "face": "FRONT",
      "origin_mm": [
        -1464.9999737739563,
        -380,
        967.8922593593597
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_-1_-5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_05",
      "face": "BACK",
      "origin_mm": [
        -1464.9999737739563,
        400,
        967.8922593593597
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_06",
      "face": "FRONT",
      "origin_mm": [
        -1464.9999737739563,
        -380,
        2032.1077108383179
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_+1_-5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_06",
      "face": "BACK",
      "origin_mm": [
        -1464.9999737739563,
        400,
        2032.1077108383179
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_07",
      "face": "FRONT",
      "origin_mm": [
        -1099.2155075073242,
        -380,
        2032.1077108383179
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_+1_-3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_07",
      "face": "BACK",
      "origin_mm": [
        -1099.2155075073242,
        400,
        2032.1077108383179
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_08",
      "face": "FRONT",
      "origin_mm": [
        -1099.2155075073242,
        -380,
        2599.215507507324
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_+1_+0",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_08",
      "face": "BACK",
      "origin_mm": [
        -1099.2155075073242,
        400,
        2599.215507507324
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_09",
      "face": "FRONT",
      "origin_mm": [
        -532.1077406406403,
        -380,
        2599.215507507324
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_+1_+3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_09",
      "face": "BACK",
      "origin_mm": [
        -532.1077406406403,
        400,
        2599.215507507324
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_10",
      "face": "FRONT",
      "origin_mm": [
        -532.1077406406403,
        -380,
        2965.000033378601
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_-1_+1_+5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_10",
      "face": "BACK",
      "origin_mm": [
        -532.1077406406403,
        400,
        2965.000033378601
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "SUPPORT_REAR_2955",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_11",
      "face": "FRONT",
      "origin_mm": [
        532.1077406406403,
        -380,
        2965.000033378601
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_+1_+5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_11",
      "face": "BACK",
      "origin_mm": [
        532.1077406406403,
        400,
        2965.000033378601
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "SUPPORT_REAR_2955",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_12",
      "face": "FRONT",
      "origin_mm": [
        532.1077406406403,
        -380,
        2599.215507507324
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_+1_+3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_12",
      "face": "BACK",
      "origin_mm": [
        532.1077406406403,
        400,
        2599.215507507324
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_13",
      "face": "FRONT",
      "origin_mm": [
        1099.2155075073242,
        -380,
        2599.215507507324
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_+1_+0",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_13",
      "face": "BACK",
      "origin_mm": [
        1099.2155075073242,
        400,
        2599.215507507324
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_14",
      "face": "FRONT",
      "origin_mm": [
        1099.2155075073242,
        -380,
        2032.1077108383179
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_+1_-3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_14",
      "face": "BACK",
      "origin_mm": [
        1099.2155075073242,
        400,
        2032.1077108383179
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_15",
      "face": "FRONT",
      "origin_mm": [
        1464.9999737739563,
        -380,
        2032.1077108383179
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_+1_-5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_15",
      "face": "BACK",
      "origin_mm": [
        1464.9999737739563,
        400,
        2032.1077108383179
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_16",
      "face": "FRONT",
      "origin_mm": [
        1464.9999737739563,
        -380,
        967.8922593593597
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_-1_-5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_16",
      "face": "BACK",
      "origin_mm": [
        1464.9999737739563,
        400,
        967.8922593593597
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_17",
      "face": "FRONT",
      "origin_mm": [
        1099.2155075073242,
        -380,
        967.8922593593597
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_-1_-3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_17",
      "face": "BACK",
      "origin_mm": [
        1099.2155075073242,
        400,
        967.8922593593597
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_18",
      "face": "FRONT",
      "origin_mm": [
        1099.2155075073242,
        -380,
        400.7844924926758
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_-1_+0",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_18",
      "face": "BACK",
      "origin_mm": [
        1099.2155075073242,
        400,
        400.7844924926758
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_19",
      "face": "FRONT",
      "origin_mm": [
        532.1077406406403,
        -380,
        400.7844924926758
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_-1_+3",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_19",
      "face": "BACK",
      "origin_mm": [
        532.1077406406403,
        400,
        400.7844924926758
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "BRACE_REAR_+1",
          "first_hit_mm": 10.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_20",
      "face": "FRONT",
      "origin_mm": [
        532.1077406406403,
        -380,
        35.00000014901161
      ],
      "direction": [
        0,
        -1,
        0
      ],
      "hits": [
        {
          "ID": "FACADE_+1_-1_+5",
          "first_hit_mm": 20.0
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    },
    {
      "kind": "depth_axis_approach",
      "part": "DEPTH_20",
      "face": "BACK",
      "origin_mm": [
        532.1077406406403,
        400,
        35.00000014901161
      ],
      "direction": [
        0,
        1,
        0
      ],
      "hits": [
        {
          "ID": "SUPPORT_REAR_45",
          "first_hit_mm": 0.05,
          "starts_inside": true
        }
      ],
      "meaning": "Only centerline outside frame checked; screw through70mm into depth end grain not sized."
    }
  ],
  "parts": [
    {
      "ID": "FACADE_+1_+1_+8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2942.4977
        ],
        [
          57.5022,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 1653.253
        },
        {
          "ID": "FACADE_-1_+1_+8",
          "area_mm2": 1150.046
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2751.579
        ],
        [
          248.421,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 11879.384
        },
        {
          "ID": "FACADE_-1_+1_+7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2560.6601
        ],
        [
          439.3398,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 9743.038
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_+1_+6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+5",
      "family": "T17",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2369.7414
        ],
        [
          567.1077,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 11879.383
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 6870.561
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 5008.824
        },
        {
          "ID": "FACADE_-1_+1_+5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+4",
      "family": "T16",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2178.8225
        ],
        [
          567.1077,
          -380.0,
          2915.6358
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 10134.77
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_+1_+4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+3",
      "family": "T15",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          2062.2153
        ],
        [
          646.3118,
          -380.0,
          2724.7171
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 7994.303
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 3094.288
        },
        {
          "ID": "FACADE_-1_+1_+3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+2",
      "family": "T20",
      "group": "fachada",
      "bounds_mm": [
        [
          92.7752,
          -400.0,
          2020.9904
        ],
        [
          837.2307,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 11879.418
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 11879.423
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+1",
      "family": "T19",
      "group": "fachada",
      "bounds_mm": [
        [
          238.6671,
          -400.0,
          1950.5147
        ],
        [
          1028.1495,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 11303.669
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.398
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 11879.424
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_+0",
      "family": "T18",
      "group": "fachada",
      "bounds_mm": [
        [
          356.3271,
          -400.0,
          1856.3272
        ],
        [
          1134.2155,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 8242.148
        },
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 110.305
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.395
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 3489.716
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 8389.695
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-1",
      "family": "T08",
      "group": "fachada",
      "bounds_mm": [
        [
          450.5147,
          -400.0,
          1738.6671
        ],
        [
          1134.2155,
          -380.0,
          2528.1494
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 11879.375
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11423.945
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 11879.367
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-2",
      "family": "T25",
      "group": "fachada",
      "bounds_mm": [
        [
          520.9904,
          -400.0,
          1592.7752
        ],
        [
          1134.2155,
          -380.0,
          2337.2307
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 11177.197
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4184.174
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-3",
      "family": "T10",
      "group": "fachada",
      "bounds_mm": [
        [
          562.2153,
          -400.0,
          1500.0
        ],
        [
          1224.717,
          -380.0,
          2146.3118
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 63.978
        },
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 3780.05
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 133.014
        },
        {
          "ID": "FRAME_FRONT_17",
          "area_mm2": 3885.107
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 7994.276
        },
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-4",
      "family": "T11",
      "group": "fachada",
      "bounds_mm": [
        [
          678.8225,
          -400.0,
          1500.0
        ],
        [
          1415.6359,
          -380.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_17",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_-1_-4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-5",
      "family": "T12",
      "group": "fachada",
      "bounds_mm": [
        [
          869.7413,
          -400.0,
          1500.0
        ],
        [
          1500.0,
          -380.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_17",
          "area_mm2": 1994.01
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 9885.378
        },
        {
          "ID": "FACADE_+1_-1_-5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          1060.6601,
          -400.0,
          1500.0
        ],
        [
          1500.0,
          -380.0,
          1939.3399
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_-1_-6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          1251.579,
          -400.0,
          1500.0
        ],
        [
          1500.0,
          -380.0,
          1748.421
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5594.249
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_-1_-7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_+1_-8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          1442.4978,
          -400.0,
          1500.0
        ],
        [
          1500.0,
          -380.0,
          1557.5022
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_+1_-1_-8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          0.0
        ],
        [
          57.5022,
          -380.0,
          57.5022
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 1653.25
        },
        {
          "ID": "FACADE_-1_-1_+8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          0.0
        ],
        [
          248.421,
          -380.0,
          248.421
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_-1_-1_+7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          0.0
        ],
        [
          439.3398,
          -380.0,
          439.3398
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 9743.053
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_-1_-1_+6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+5",
      "family": "T12",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          0.0
        ],
        [
          567.1077,
          -380.0,
          630.2587
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 11879.398
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 6870.563
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 5008.831
        },
        {
          "ID": "FACADE_-1_-1_+5",
          "area_mm2": 3394.115
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+4",
      "family": "T11",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          84.3641
        ],
        [
          567.1077,
          -380.0,
          821.1775
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 10134.78
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+3",
      "family": "T10",
      "group": "fachada",
      "bounds_mm": [
        [
          0.0,
          -400.0,
          275.2829
        ],
        [
          646.3118,
          -380.0,
          937.7847
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 7994.285
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 3094.286
        },
        {
          "ID": "FACADE_-1_-1_+3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+2",
      "family": "T09",
      "group": "fachada",
      "bounds_mm": [
        [
          92.7752,
          -400.0,
          365.7845
        ],
        [
          837.2307,
          -380.0,
          979.0096
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.392
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 11879.392
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 11879.393
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+1",
      "family": "T08",
      "group": "fachada",
      "bounds_mm": [
        [
          238.6671,
          -400.0,
          365.7845
        ],
        [
          1028.1495,
          -380.0,
          1049.4853
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 11303.636
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 11879.393
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_+0",
      "family": "T07",
      "group": "fachada",
      "bounds_mm": [
        [
          356.3271,
          -400.0,
          365.7845
        ],
        [
          1134.2155,
          -380.0,
          1143.6728
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 8242.152
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 110.304
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 3489.701
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 8389.687
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-1",
      "family": "T13",
      "group": "fachada",
      "bounds_mm": [
        [
          450.5147,
          -400.0,
          471.8505
        ],
        [
          1134.2155,
          -380.0,
          1261.3329
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 11879.393
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 11423.947
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-2",
      "family": "T14",
      "group": "fachada",
      "bounds_mm": [
        [
          520.9904,
          -400.0,
          662.7693
        ],
        [
          1134.2155,
          -380.0,
          1407.2248
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 11177.207
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4184.174
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-3",
      "family": "T15",
      "group": "fachada",
      "bounds_mm": [
        [
          562.2153,
          -400.0,
          853.6882
        ],
        [
          1224.717,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 3780.05
        },
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 63.979
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 133.014
        },
        {
          "ID": "FRAME_FRONT_18",
          "area_mm2": 3885.108
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 7994.28
        },
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-4",
      "family": "T16",
      "group": "fachada",
      "bounds_mm": [
        [
          678.8225,
          -400.0,
          932.8923
        ],
        [
          1415.6359,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_18",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_+1_-4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-5",
      "family": "T17",
      "group": "fachada",
      "bounds_mm": [
        [
          869.7413,
          -400.0,
          932.8923
        ],
        [
          1500.0,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_18",
          "area_mm2": 1994.013
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 9885.382
        },
        {
          "ID": "FACADE_+1_+1_-5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          1060.6601,
          -400.0,
          1060.6601
        ],
        [
          1500.0,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_+1_-6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          1251.579,
          -400.0,
          1251.579
        ],
        [
          1500.0,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 5594.249
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_+1_-7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_+1_-1_-8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          1442.4978,
          -400.0,
          1442.4978
        ],
        [
          1500.0,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_+1_+1_-8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          -57.5022,
          -400.0,
          2942.4977
        ],
        [
          0.0,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 1653.253
        },
        {
          "ID": "FACADE_+1_+1_+8",
          "area_mm2": 1150.046
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          -248.421,
          -400.0,
          2751.579
        ],
        [
          0.0,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 11879.384
        },
        {
          "ID": "FACADE_+1_+1_+7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          -439.3398,
          -400.0,
          2560.6601
        ],
        [
          0.0,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 9743.038
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_+1_+6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+5",
      "family": "T12",
      "group": "fachada",
      "bounds_mm": [
        [
          -567.1077,
          -400.0,
          2369.7414
        ],
        [
          0.0,
          -380.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 11879.383
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 6870.561
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 5008.824
        },
        {
          "ID": "FACADE_+1_+1_+5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+4",
      "family": "T11",
      "group": "fachada",
      "bounds_mm": [
        [
          -567.1077,
          -400.0,
          2178.8225
        ],
        [
          0.0,
          -380.0,
          2915.6358
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 10134.77
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_+1_+4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+3",
      "family": "T10",
      "group": "fachada",
      "bounds_mm": [
        [
          -646.3118,
          -400.0,
          2062.2153
        ],
        [
          0.0,
          -380.0,
          2724.7171
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 7994.303
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 3094.288
        },
        {
          "ID": "FACADE_+1_+1_+3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+2",
      "family": "T09",
      "group": "fachada",
      "bounds_mm": [
        [
          -837.2307,
          -400.0,
          2020.9904
        ],
        [
          -92.7752,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 11879.418
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 11879.423
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+1",
      "family": "T08",
      "group": "fachada",
      "bounds_mm": [
        [
          -1028.1495,
          -400.0,
          1950.5147
        ],
        [
          -238.6671,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 11303.669
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.398
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 11879.424
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_+0",
      "family": "T07",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          1856.3272
        ],
        [
          -356.3271,
          -380.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 8242.148
        },
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 110.305
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.395
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 3489.716
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 8389.695
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-1",
      "family": "T13",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          1738.6671
        ],
        [
          -450.5147,
          -380.0,
          2528.1494
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 11879.375
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11423.945
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 11879.367
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-2",
      "family": "T14",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          1592.7752
        ],
        [
          -520.9904,
          -380.0,
          2337.2307
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 11177.197
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4184.174
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-3",
      "family": "T15",
      "group": "fachada",
      "bounds_mm": [
        [
          -1224.717,
          -400.0,
          1500.0
        ],
        [
          -562.2153,
          -380.0,
          2146.3118
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 63.978
        },
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 3780.05
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 133.014
        },
        {
          "ID": "FRAME_FRONT_13",
          "area_mm2": 3885.107
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 7994.276
        },
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-4",
      "family": "T16",
      "group": "fachada",
      "bounds_mm": [
        [
          -1415.6359,
          -400.0,
          1500.0
        ],
        [
          -678.8225,
          -380.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_13",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_-1_-4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-5",
      "family": "T17",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1500.0
        ],
        [
          -869.7413,
          -380.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_13",
          "area_mm2": 1994.01
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 9885.378
        },
        {
          "ID": "FACADE_-1_-1_-5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1500.0
        ],
        [
          -1060.6601,
          -380.0,
          1939.3399
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_-1_-6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1500.0
        ],
        [
          -1251.579,
          -380.0,
          1748.421
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5594.249
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_-1_-7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_+1_-8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1500.0
        ],
        [
          -1442.4978,
          -380.0,
          1557.5022
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_-1_-1_-8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          -57.5022,
          -400.0,
          0.0
        ],
        [
          0.0,
          -380.0,
          57.5022
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 1653.25
        },
        {
          "ID": "FACADE_+1_-1_+8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          -248.421,
          -400.0,
          0.0
        ],
        [
          0.0,
          -380.0,
          248.421
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_+1_-1_+7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          -439.3398,
          -400.0,
          0.0
        ],
        [
          0.0,
          -380.0,
          439.3398
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 9743.053
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_+1_-1_+6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+5",
      "family": "T17",
      "group": "fachada",
      "bounds_mm": [
        [
          -567.1077,
          -400.0,
          0.0
        ],
        [
          0.0,
          -380.0,
          630.2587
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 11879.398
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 6870.563
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 5008.831
        },
        {
          "ID": "FACADE_+1_-1_+5",
          "area_mm2": 3394.115
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+4",
      "family": "T16",
      "group": "fachada",
      "bounds_mm": [
        [
          -567.1077,
          -400.0,
          84.3641
        ],
        [
          0.0,
          -380.0,
          821.1775
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 10134.78
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+3",
      "family": "T15",
      "group": "fachada",
      "bounds_mm": [
        [
          -646.3118,
          -400.0,
          275.2829
        ],
        [
          0.0,
          -380.0,
          937.7847
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 7994.285
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 3094.286
        },
        {
          "ID": "FACADE_+1_-1_+3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+2",
      "family": "T20",
      "group": "fachada",
      "bounds_mm": [
        [
          -837.2307,
          -400.0,
          365.7845
        ],
        [
          -92.7752,
          -380.0,
          979.0096
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 11879.392
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.392
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 11879.393
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+1",
      "family": "T19",
      "group": "fachada",
      "bounds_mm": [
        [
          -1028.1495,
          -400.0,
          365.7845
        ],
        [
          -238.6671,
          -380.0,
          1049.4853
        ]
      ],
      "contacts": [
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 11303.636
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 11879.393
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_+0",
      "family": "T18",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          365.7845
        ],
        [
          -356.3271,
          -380.0,
          1143.6728
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 8242.152
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 110.304
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 3489.701
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 8389.687
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-1",
      "family": "T08",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          471.8505
        ],
        [
          -450.5147,
          -380.0,
          1261.3329
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 11879.393
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 11423.947
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-2",
      "family": "T25",
      "group": "fachada",
      "bounds_mm": [
        [
          -1134.2155,
          -400.0,
          662.7693
        ],
        [
          -520.9904,
          -380.0,
          1407.2248
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 11177.207
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4184.174
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 11879.383
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-3",
      "family": "T10",
      "group": "fachada",
      "bounds_mm": [
        [
          -1224.717,
          -400.0,
          853.6882
        ],
        [
          -562.2153,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 3780.05
        },
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 63.979
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 133.014
        },
        {
          "ID": "FRAME_FRONT_12",
          "area_mm2": 3885.108
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 7994.28
        },
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 1810.032
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-4",
      "family": "T11",
      "group": "fachada",
      "bounds_mm": [
        [
          -1415.6359,
          -400.0,
          932.8923
        ],
        [
          -678.8225,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_12",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_+1_-4",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-5",
      "family": "T12",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          932.8923
        ],
        [
          -869.7413,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_12",
          "area_mm2": 1994.013
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 9885.382
        },
        {
          "ID": "FACADE_-1_+1_-5",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-6",
      "family": "T01",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1060.6601
        ],
        [
          -1060.6601,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5939.691
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_+1_-6",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-7",
      "family": "T02",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1251.579
        ],
        [
          -1251.579,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 5594.249
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_+1_-7",
          "area_mm2": 3394.114
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FACADE_-1_-1_-8",
      "family": "T03",
      "group": "fachada",
      "bounds_mm": [
        [
          -1500.0,
          -400.0,
          1442.4978
        ],
        [
          -1442.4978,
          -380.0,
          1500.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_-1_+1_-8",
          "area_mm2": 1150.044
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Tornillos desmontables por frente; apoyo y metal bajo piel por verificar",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_PLYWOOD_01",
      "family": "T45",
      "group": "mesa",
      "bounds_mm": [
        [
          -900.0,
          -310.0,
          982.0
        ],
        [
          900.0,
          310.0,
          1000.0
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 1260.0
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 1260.0
        },
        {
          "ID": "TABLE_BEAM_+275",
          "area_mm2": 126000.011
        },
        {
          "ID": "TABLE_BEAM_+0",
          "area_mm2": 125999.997
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 126000.011
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_REAR_+1",
      "family": "T40",
      "group": "riostras",
      "bounds_mm": [
        [
          0.0,
          410.0,
          90.0
        ],
        [
          905.0,
          480.0,
          844.7254
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_REAR_-1",
          "area_mm2": 6261.554
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 4815.071
        },
        {
          "ID": "POST_+1",
          "area_mm2": 2430.777
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_REAR_-1",
      "family": "T40",
      "group": "riostras",
      "bounds_mm": [
        [
          -905.0,
          410.0,
          90.0
        ],
        [
          0.0,
          480.0,
          844.7254
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_REAR_+1",
          "area_mm2": 6261.554
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 4815.071
        },
        {
          "ID": "POST_-1",
          "area_mm2": 2430.777
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SUPPORT_REAR_2955",
      "family": "T43",
      "group": "postes y enlaces",
      "bounds_mm": [
        [
          -905.0,
          400.0,
          2910.0001
        ],
        [
          905.0,
          490.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "POST_+1",
          "area_mm2": 8099.993
        },
        {
          "ID": "POST_-1",
          "area_mm2": 8099.993
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 6299.993
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 6299.993
        },
        {
          "ID": "FRAME_BACK_15",
          "area_mm2": 69595.018
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/pernos según cálculo; instalar enlaces después deDEPTH",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SUPPORT_REAR_45",
      "family": "T43",
      "group": "postes y enlaces",
      "bounds_mm": [
        [
          -905.0,
          400.0,
          0.0
        ],
        [
          905.0,
          490.0,
          90.0
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_REAR_+1",
          "area_mm2": 4815.071
        },
        {
          "ID": "BRACE_REAR_-1",
          "area_mm2": 4815.071
        },
        {
          "ID": "POST_+1",
          "area_mm2": 8100.001
        },
        {
          "ID": "POST_-1",
          "area_mm2": 8100.001
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 6300.0
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 6300.0
        },
        {
          "ID": "FRAME_BACK_20",
          "area_mm2": 69595.084
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/pernos según cálculo; instalar enlaces después deDEPTH",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_TABLE_+1",
      "family": "T41",
      "group": "riostras",
      "bounds_mm": [
        [
          915.0,
          -324.4975,
          117.5025
        ],
        [
          985.0,
          400.0,
          842.0
        ]
      ],
      "contacts": [
        {
          "ID": "POST_+1",
          "area_mm2": 6929.646
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 5914.823
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_ARM_+1",
      "family": "T44",
      "group": "mesa",
      "bounds_mm": [
        [
          915.0,
          -310.0,
          842.0
        ],
        [
          985.0,
          400.0,
          912.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 3289.999
        },
        {
          "ID": "POST_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_TABLE_+1",
          "area_mm2": 5914.823
        },
        {
          "ID": "TABLE_BEAM_+275",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_BEAM_+0",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_TABLE_-1",
      "family": "T41",
      "group": "riostras",
      "bounds_mm": [
        [
          -985.0,
          -324.4975,
          117.5025
        ],
        [
          -915.0,
          400.0,
          842.0
        ]
      ],
      "contacts": [
        {
          "ID": "POST_-1",
          "area_mm2": 6929.646
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 5914.823
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_ARM_-1",
      "family": "T44",
      "group": "mesa",
      "bounds_mm": [
        [
          -985.0,
          -310.0,
          842.0
        ],
        [
          -915.0,
          400.0,
          912.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 3289.999
        },
        {
          "ID": "POST_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_TABLE_-1",
          "area_mm2": 5914.823
        },
        {
          "ID": "TABLE_BEAM_+275",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_BEAM_+0",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_BEAM_+275",
      "family": "T39",
      "group": "mesa",
      "bounds_mm": [
        [
          -985.0,
          240.0,
          912.0
        ],
        [
          985.0,
          310.0,
          982.0
        ]
      ],
      "contacts": [
        {
          "ID": "TABLE_PLYWOOD_01",
          "area_mm2": 126000.011
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_BEAM_+0",
      "family": "T39",
      "group": "mesa",
      "bounds_mm": [
        [
          -985.0,
          -35.0,
          912.0
        ],
        [
          985.0,
          35.0,
          982.0
        ]
      ],
      "contacts": [
        {
          "ID": "TABLE_PLYWOOD_01",
          "area_mm2": 125999.997
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "TABLE_BEAM_-275",
      "family": "T39",
      "group": "mesa",
      "bounds_mm": [
        [
          -985.0,
          -310.0,
          912.0
        ],
        [
          985.0,
          -240.0,
          982.0
        ]
      ],
      "contacts": [
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 9611.523
        },
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 9611.523
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 20771.411
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "TABLE_PLYWOOD_01",
          "area_mm2": 126000.011
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Apoyo directo de vigas sobre ménsulas; fijación desde cara accesible antes de tablero",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "POST_+1",
      "family": "T42",
      "group": "postes y enlaces",
      "bounds_mm": [
        [
          905.0,
          400.0,
          0.0
        ],
        [
          995.0,
          490.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_REAR_+1",
          "area_mm2": 2430.777
        },
        {
          "ID": "SUPPORT_REAR_2955",
          "area_mm2": 8099.993
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 8100.001
        },
        {
          "ID": "BRACE_TABLE_+1",
          "area_mm2": 6929.646
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_19",
          "area_mm2": 6300.002
        },
        {
          "ID": "FRAME_BACK_16",
          "area_mm2": 6300.018
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/pernos según cálculo; instalar enlaces después deDEPTH",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "POST_-1",
      "family": "T42",
      "group": "postes y enlaces",
      "bounds_mm": [
        [
          -995.0,
          400.0,
          0.0
        ],
        [
          -905.0,
          490.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_REAR_-1",
          "area_mm2": 2430.777
        },
        {
          "ID": "SUPPORT_REAR_2955",
          "area_mm2": 8099.993
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 8100.001
        },
        {
          "ID": "BRACE_TABLE_-1",
          "area_mm2": 6929.646
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_14",
          "area_mm2": 6300.018
        },
        {
          "ID": "FRAME_BACK_11",
          "area_mm2": 6300.002
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/pernos según cálculo; instalar enlaces después deDEPTH",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_DEPTH_+1_+1",
      "family": "T38",
      "group": "riostras",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          2067.1077
        ],
        [
          1134.2155,
          330.0,
          2564.2154
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_14",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 3102.221
        },
        {
          "ID": "DEPTH_13",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_BACK_07",
          "area_mm2": 3102.238
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_DEPTH_+1_-1",
      "family": "T38",
      "group": "riostras",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          435.7845
        ],
        [
          1134.2155,
          330.0,
          932.8923
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_17",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 3102.236
        },
        {
          "ID": "FRAME_BACK_09",
          "area_mm2": 3102.233
        },
        {
          "ID": "DEPTH_18",
          "area_mm2": 3993.963
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_DEPTH_-1_+1",
      "family": "T38",
      "group": "riostras",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          2067.1077
        ],
        [
          -1064.2155,
          330.0,
          2564.2154
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_07",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 3102.221
        },
        {
          "ID": "DEPTH_08",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_BACK_04",
          "area_mm2": 3102.238
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "BRACE_DEPTH_-1_-1",
      "family": "T38",
      "group": "riostras",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          435.7845
        ],
        [
          -1064.2155,
          330.0,
          932.8923
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_04",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 3102.236
        },
        {
          "ID": "FRAME_BACK_02",
          "area_mm2": 3102.233
        },
        {
          "ID": "DEPTH_03",
          "area_mm2": 3993.963
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Placas/escuadras laterales calculadas; cerrar después de separadores",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_05",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          2665.0
        ],
        [
          497.1077,
          -310.0,
          2734.9999
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+6",
          "area_mm2": 9743.038
        },
        {
          "ID": "FACADE_+1_+1_+5",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_+1_+4",
          "area_mm2": 10134.77
        },
        {
          "ID": "FACADE_-1_+1_+6",
          "area_mm2": 9743.038
        },
        {
          "ID": "FACADE_-1_+1_+5",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_+1_+4",
          "area_mm2": 10134.77
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_04_1",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          -380.0,
          2065.0001
        ],
        [
          1064.2155,
          -310.0,
          2135.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+0",
          "area_mm2": 8242.148
        },
        {
          "ID": "FACADE_+1_+1_-1",
          "area_mm2": 11879.375
        },
        {
          "ID": "FACADE_+1_+1_-2",
          "area_mm2": 11177.197
        },
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 63.978
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_04_0",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          -380.0,
          2065.0001
        ],
        [
          -567.1077,
          -310.0,
          2135.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_+0",
          "area_mm2": 8242.148
        },
        {
          "ID": "FACADE_-1_+1_-1",
          "area_mm2": 11879.375
        },
        {
          "ID": "FACADE_-1_+1_-2",
          "area_mm2": 11177.197
        },
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 63.978
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_03_1",
      "family": "T37",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          -380.0,
          1465.0
        ],
        [
          1429.9999,
          -310.0,
          1535.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 3780.05
        },
        {
          "ID": "FACADE_+1_+1_-4",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_+1_-5",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_+1_-6",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_+1_-7",
          "area_mm2": 5594.249
        },
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 3780.05
        },
        {
          "ID": "FACADE_+1_-1_-4",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_-1_-5",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_-1_-6",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_+1_-1_-7",
          "area_mm2": 5594.249
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_03_0",
      "family": "T37",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1429.9999,
          -380.0,
          1465.0
        ],
        [
          -567.1077,
          -310.0,
          1535.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 3780.05
        },
        {
          "ID": "FACADE_-1_+1_-4",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_+1_-5",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_+1_-6",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_+1_-7",
          "area_mm2": 5594.249
        },
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 3780.05
        },
        {
          "ID": "FACADE_-1_-1_-4",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_-1_-5",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_-1_-6",
          "area_mm2": 5939.691
        },
        {
          "ID": "FACADE_-1_-1_-7",
          "area_mm2": 5594.249
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_02_1",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          -380.0,
          865.0
        ],
        [
          1064.2155,
          -310.0,
          935.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+0",
          "area_mm2": 8242.152
        },
        {
          "ID": "FACADE_+1_-1_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_-2",
          "area_mm2": 11177.207
        },
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 63.979
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "TABLE_ARM_+1",
          "area_mm2": 3289.999
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 9611.523
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_02_0",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          -380.0,
          865.0
        ],
        [
          -567.1077,
          -310.0,
          935.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_-1_+0",
          "area_mm2": 8242.152
        },
        {
          "ID": "FACADE_-1_-1_-1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_-2",
          "area_mm2": 11177.207
        },
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 63.979
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "TABLE_ARM_-1",
          "area_mm2": 3289.999
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 9611.523
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "SKIN_RAIL_01",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          265.0
        ],
        [
          497.1077,
          -310.0,
          335.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+6",
          "area_mm2": 9743.053
        },
        {
          "ID": "FACADE_+1_-1_+5",
          "area_mm2": 11879.398
        },
        {
          "ID": "FACADE_+1_-1_+4",
          "area_mm2": 10134.78
        },
        {
          "ID": "FACADE_-1_-1_+6",
          "area_mm2": 9743.053
        },
        {
          "ID": "FACADE_-1_-1_+5",
          "area_mm2": 11879.398
        },
        {
          "ID": "FACADE_-1_-1_+4",
          "area_mm2": 10134.78
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.001
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.001
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "DEPTH_20",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          497.1077,
          -310.0,
          0.0
        ],
        [
          567.1077,
          330.0,
          70.0
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        46,
        47
      ]
    },
    {
      "ID": "DEPTH_19",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          497.1077,
          -310.0,
          365.7845
        ],
        [
          567.1077,
          330.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        44,
        45
      ]
    },
    {
      "ID": "DEPTH_18",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          365.7845
        ],
        [
          1134.2155,
          330.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_09",
          "area_mm2": 4899.995
        },
        {
          "ID": "BRACE_DEPTH_+1_-1",
          "area_mm2": 3993.963
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        42,
        43
      ]
    },
    {
      "ID": "DEPTH_17",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          932.8923
        ],
        [
          1134.2155,
          330.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_DEPTH_+1_-1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_09",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        40,
        41
      ]
    },
    {
      "ID": "DEPTH_16",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1429.9999,
          -310.0,
          932.8923
        ],
        [
          1500.0,
          330.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 4900.003
        },
        {
          "ID": "FRAME_BACK_08",
          "area_mm2": 4900.003
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        38,
        39
      ]
    },
    {
      "ID": "DEPTH_15",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1429.9999,
          -310.0,
          1997.1077
        ],
        [
          1500.0,
          330.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_08",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        36,
        37
      ]
    },
    {
      "ID": "DEPTH_14",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          1997.1077
        ],
        [
          1134.2155,
          330.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_DEPTH_+1_+1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 4899.991
        },
        {
          "ID": "FRAME_BACK_07",
          "area_mm2": 4899.991
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        34,
        35
      ]
    },
    {
      "ID": "DEPTH_13",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          1064.2155,
          -310.0,
          2564.2154
        ],
        [
          1134.2155,
          330.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 4900.007
        },
        {
          "ID": "BRACE_DEPTH_+1_+1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_BACK_07",
          "area_mm2": 4900.007
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        32,
        33
      ]
    },
    {
      "ID": "DEPTH_12",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          497.1077,
          -310.0,
          2564.2154
        ],
        [
          567.1077,
          330.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        30,
        31
      ]
    },
    {
      "ID": "DEPTH_11",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          497.1077,
          -310.0,
          2930.0001
        ],
        [
          567.1077,
          330.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        28,
        29
      ]
    },
    {
      "ID": "DEPTH_10",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -567.1077,
          -310.0,
          2930.0001
        ],
        [
          -497.1077,
          330.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.995
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        26,
        27
      ]
    },
    {
      "ID": "DEPTH_09",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -567.1077,
          -310.0,
          2564.2154
        ],
        [
          -497.1077,
          330.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.012
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        24,
        25
      ]
    },
    {
      "ID": "DEPTH_08",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          2564.2154
        ],
        [
          -1064.2155,
          330.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 4900.007
        },
        {
          "ID": "BRACE_DEPTH_-1_+1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_BACK_04",
          "area_mm2": 4900.007
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        22,
        23
      ]
    },
    {
      "ID": "DEPTH_07",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          1997.1077
        ],
        [
          -1064.2155,
          330.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_DEPTH_-1_+1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 4899.991
        },
        {
          "ID": "FRAME_BACK_04",
          "area_mm2": 4899.991
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        20,
        21
      ]
    },
    {
      "ID": "DEPTH_06",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1500.0,
          -310.0,
          1997.1077
        ],
        [
          -1429.9999,
          330.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_03",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        18,
        19
      ]
    },
    {
      "ID": "DEPTH_05",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1500.0,
          -310.0,
          932.8923
        ],
        [
          -1429.9999,
          330.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 4900.003
        },
        {
          "ID": "FRAME_BACK_03",
          "area_mm2": 4900.003
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        16,
        17
      ]
    },
    {
      "ID": "DEPTH_04",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          932.8923
        ],
        [
          -1064.2155,
          330.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "BRACE_DEPTH_-1_-1",
          "area_mm2": 3993.963
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_02",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        14,
        15
      ]
    },
    {
      "ID": "DEPTH_03",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -1134.2155,
          -310.0,
          365.7845
        ],
        [
          -1064.2155,
          330.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_02",
          "area_mm2": 4899.995
        },
        {
          "ID": "BRACE_DEPTH_-1_-1",
          "area_mm2": 3993.963
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        12,
        13
      ]
    },
    {
      "ID": "DEPTH_02",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -567.1077,
          -310.0,
          365.7845
        ],
        [
          -497.1077,
          330.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        10,
        11
      ]
    },
    {
      "ID": "DEPTH_01",
      "family": "T29",
      "group": "profundidad",
      "bounds_mm": [
        [
          -567.1077,
          -310.0,
          0.0
        ],
        [
          -497.1077,
          330.0,
          70.0
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.0
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "H3/escuadras encaras laterales; evitar depender de tornillo a testa sin ficha",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        8,
        9
      ]
    },
    {
      "ID": "OPENING_BACK_H_+1",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          330.0,
          2067.1077
        ],
        [
          497.1077,
          400.0,
          2137.1078
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        6,
        7
      ]
    },
    {
      "ID": "LONG_BACK_+1",
      "family": "T36",
      "group": "bastidor",
      "bounds_mm": [
        [
          497.1077,
          330.0,
          0.0
        ],
        [
          567.1077,
          400.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_19",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_16",
          "area_mm2": 4900.012
        },
        {
          "ID": "SUPPORT_REAR_2955",
          "area_mm2": 6299.993
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 6300.0
        },
        {
          "ID": "DEPTH_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "DEPTH_19",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_12",
          "area_mm2": 4900.012
        },
        {
          "ID": "DEPTH_11",
          "area_mm2": 4899.995
        },
        {
          "ID": "OPENING_BACK_H_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "OPENING_BACK_H_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "FRAME_BACK_15",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "OPENING_BACK_H_-1",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          330.0,
          862.8923
        ],
        [
          497.1077,
          400.0,
          932.8923
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        4,
        5
      ]
    },
    {
      "ID": "LONG_BACK_-1",
      "family": "T36",
      "group": "bastidor",
      "bounds_mm": [
        [
          -567.1077,
          330.0,
          0.0
        ],
        [
          -497.1077,
          400.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_14",
          "area_mm2": 4900.012
        },
        {
          "ID": "FRAME_BACK_11",
          "area_mm2": 4899.999
        },
        {
          "ID": "SUPPORT_REAR_2955",
          "area_mm2": 6299.993
        },
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 6300.0
        },
        {
          "ID": "DEPTH_10",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_09",
          "area_mm2": 4900.012
        },
        {
          "ID": "DEPTH_02",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_01",
          "area_mm2": 4900.0
        },
        {
          "ID": "OPENING_BACK_H_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "OPENING_BACK_H_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "FRAME_BACK_15",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "OPENING_FRONT_H_+1",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          2067.1077
        ],
        [
          497.1077,
          -310.0,
          2137.1078
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+3",
          "area_mm2": 7994.303
        },
        {
          "ID": "FACADE_+1_+1_+2",
          "area_mm2": 11879.418
        },
        {
          "ID": "FACADE_+1_+1_+1",
          "area_mm2": 11303.669
        },
        {
          "ID": "FACADE_+1_+1_+0",
          "area_mm2": 110.305
        },
        {
          "ID": "FACADE_-1_+1_+3",
          "area_mm2": 7994.303
        },
        {
          "ID": "FACADE_-1_+1_+2",
          "area_mm2": 11879.418
        },
        {
          "ID": "FACADE_-1_+1_+1",
          "area_mm2": 11303.669
        },
        {
          "ID": "FACADE_-1_+1_+0",
          "area_mm2": 110.305
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        2,
        3
      ]
    },
    {
      "ID": "LONG_FRONT_+1",
      "family": "T36",
      "group": "bastidor",
      "bounds_mm": [
        [
          497.1077,
          -380.0,
          0.0
        ],
        [
          567.1077,
          -310.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+5",
          "area_mm2": 6870.561
        },
        {
          "ID": "FACADE_+1_+1_+4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_+1_+3",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_+1_+2",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_+1_+1",
          "area_mm2": 11879.398
        },
        {
          "ID": "FACADE_+1_+1_+0",
          "area_mm2": 11879.395
        },
        {
          "ID": "FACADE_+1_+1_-1",
          "area_mm2": 11423.945
        },
        {
          "ID": "FACADE_+1_+1_-2",
          "area_mm2": 4184.174
        },
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 133.014
        },
        {
          "ID": "FACADE_+1_-1_+5",
          "area_mm2": 6870.563
        },
        {
          "ID": "FACADE_+1_-1_+4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+3",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+2",
          "area_mm2": 11879.392
        },
        {
          "ID": "FACADE_+1_-1_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+0",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_-1",
          "area_mm2": 11423.947
        },
        {
          "ID": "FACADE_+1_-1_-2",
          "area_mm2": 4184.174
        },
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 133.014
        },
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 4900.012
        },
        {
          "ID": "TABLE_PLYWOOD_01",
          "area_mm2": 1260.0
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "DEPTH_19",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_12",
          "area_mm2": 4900.012
        },
        {
          "ID": "DEPTH_11",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 4900.001
        },
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "OPENING_FRONT_H_-1",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          862.8923
        ],
        [
          497.1077,
          -310.0,
          932.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+3",
          "area_mm2": 7994.285
        },
        {
          "ID": "FACADE_+1_-1_+2",
          "area_mm2": 11879.392
        },
        {
          "ID": "FACADE_+1_-1_+1",
          "area_mm2": 11303.636
        },
        {
          "ID": "FACADE_+1_-1_+0",
          "area_mm2": 110.304
        },
        {
          "ID": "FACADE_-1_-1_+3",
          "area_mm2": 7994.285
        },
        {
          "ID": "FACADE_-1_-1_+2",
          "area_mm2": 11879.392
        },
        {
          "ID": "FACADE_-1_-1_+1",
          "area_mm2": 11303.636
        },
        {
          "ID": "FACADE_-1_-1_+0",
          "area_mm2": 110.304
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 20771.411
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Trayecto axial muestreado; consultar probes, no validación completa",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": [
        0,
        1
      ]
    },
    {
      "ID": "LONG_FRONT_-1",
      "family": "T36",
      "group": "bastidor",
      "bounds_mm": [
        [
          -567.1077,
          -380.0,
          0.0
        ],
        [
          -497.1077,
          -310.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_+5",
          "area_mm2": 6870.561
        },
        {
          "ID": "FACADE_-1_+1_+4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_+1_+3",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_+1_+2",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_+1_+1",
          "area_mm2": 11879.398
        },
        {
          "ID": "FACADE_-1_+1_+0",
          "area_mm2": 11879.395
        },
        {
          "ID": "FACADE_-1_+1_-1",
          "area_mm2": 11423.945
        },
        {
          "ID": "FACADE_-1_+1_-2",
          "area_mm2": 4184.174
        },
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 133.014
        },
        {
          "ID": "FACADE_-1_-1_+5",
          "area_mm2": 6870.563
        },
        {
          "ID": "FACADE_-1_-1_+4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+3",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+2",
          "area_mm2": 11879.392
        },
        {
          "ID": "FACADE_-1_-1_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+0",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_-1",
          "area_mm2": 11423.947
        },
        {
          "ID": "FACADE_-1_-1_-2",
          "area_mm2": 4184.174
        },
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 133.014
        },
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 4900.012
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 4899.999
        },
        {
          "ID": "TABLE_PLYWOOD_01",
          "area_mm2": 1260.0
        },
        {
          "ID": "TABLE_BEAM_-275",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_10",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_09",
          "area_mm2": 4900.012
        },
        {
          "ID": "DEPTH_02",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_01",
          "area_mm2": 4900.0
        },
        {
          "ID": "SKIN_RAIL_05",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_01",
          "area_mm2": 4900.001
        },
        {
          "ID": "OPENING_FRONT_H_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "OPENING_FRONT_H_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_20",
          "area_mm2": 4900.0
        },
        {
          "ID": "FRAME_FRONT_15",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_20",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          330.0,
          0.0
        ],
        [
          497.1077,
          400.0,
          70.0
        ]
      ],
      "contacts": [
        {
          "ID": "SUPPORT_REAR_45",
          "area_mm2": 69595.084
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_19",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          330.0,
          365.7845
        ],
        [
          1064.2155,
          400.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "POST_+1",
          "area_mm2": 6300.002
        },
        {
          "ID": "FRAME_BACK_09",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_18",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          1134.2155,
          330.0,
          932.8923
        ],
        [
          1429.9999,
          400.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_09",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_08",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_17",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          1134.2155,
          330.0,
          1997.1077
        ],
        [
          1429.9999,
          400.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_07",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_08",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_16",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          330.0,
          2564.2154
        ],
        [
          1064.2155,
          400.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "POST_+1",
          "area_mm2": 6300.018
        },
        {
          "ID": "FRAME_BACK_07",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_15",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          330.0,
          2930.0001
        ],
        [
          497.1077,
          400.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "SUPPORT_REAR_2955",
          "area_mm2": 69595.018
        },
        {
          "ID": "LONG_BACK_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_14",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          330.0,
          2564.2154
        ],
        [
          -567.1077,
          400.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4900.012
        },
        {
          "ID": "POST_-1",
          "area_mm2": 6300.018
        },
        {
          "ID": "FRAME_BACK_04",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_13",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1429.9999,
          330.0,
          1997.1077
        ],
        [
          -1134.2155,
          400.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_04",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_03",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_12",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1429.9999,
          330.0,
          932.8923
        ],
        [
          -1134.2155,
          400.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_02",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_03",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_11",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          330.0,
          365.7845
        ],
        [
          -567.1077,
          400.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "LONG_BACK_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "POST_-1",
          "area_mm2": 6300.002
        },
        {
          "ID": "FRAME_BACK_02",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_09",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          1064.2155,
          330.0,
          365.7845
        ],
        [
          1134.2155,
          400.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_18",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_19",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_DEPTH_+1_-1",
          "area_mm2": 3102.233
        },
        {
          "ID": "DEPTH_18",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_17",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_08",
      "family": "T34",
      "group": "bastidor",
      "bounds_mm": [
        [
          1429.9999,
          330.0,
          932.8923
        ],
        [
          1500.0,
          400.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_16",
          "area_mm2": 4900.003
        },
        {
          "ID": "DEPTH_15",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_18",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_BACK_17",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_07",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          1064.2155,
          330.0,
          1997.1077
        ],
        [
          1134.2155,
          400.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_17",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_16",
          "area_mm2": 4900.012
        },
        {
          "ID": "BRACE_DEPTH_+1_+1",
          "area_mm2": 3102.238
        },
        {
          "ID": "DEPTH_14",
          "area_mm2": 4899.991
        },
        {
          "ID": "DEPTH_13",
          "area_mm2": 4900.007
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_04",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1134.2155,
          330.0,
          1997.1077
        ],
        [
          -1064.2155,
          400.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_13",
          "area_mm2": 4899.995
        },
        {
          "ID": "BRACE_DEPTH_-1_+1",
          "area_mm2": 3102.238
        },
        {
          "ID": "DEPTH_08",
          "area_mm2": 4900.007
        },
        {
          "ID": "DEPTH_07",
          "area_mm2": 4899.991
        },
        {
          "ID": "FRAME_BACK_14",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_03",
      "family": "T34",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1500.0,
          330.0,
          932.8923
        ],
        [
          -1429.9999,
          400.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "DEPTH_06",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_05",
          "area_mm2": 4900.003
        },
        {
          "ID": "FRAME_BACK_13",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_12",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_BACK_02",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1134.2155,
          330.0,
          365.7845
        ],
        [
          -1064.2155,
          400.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FRAME_BACK_12",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_DEPTH_-1_-1",
          "area_mm2": 3102.233
        },
        {
          "ID": "DEPTH_04",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_03",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_BACK_11",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_20",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          0.0
        ],
        [
          497.1077,
          -310.0,
          70.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+8",
          "area_mm2": 1653.25
        },
        {
          "ID": "FACADE_+1_-1_+7",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_+1_-1_+6",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_+1_-1_+5",
          "area_mm2": 5008.831
        },
        {
          "ID": "FACADE_-1_-1_+8",
          "area_mm2": 1653.25
        },
        {
          "ID": "FACADE_-1_-1_+7",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_-1_-1_+6",
          "area_mm2": 11879.394
        },
        {
          "ID": "FACADE_-1_-1_+5",
          "area_mm2": 5008.831
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.0
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.0
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_19",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          -380.0,
          365.7845
        ],
        [
          1064.2155,
          -310.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+3",
          "area_mm2": 3094.286
        },
        {
          "ID": "FACADE_+1_-1_+2",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_+0",
          "area_mm2": 3489.701
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_18",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          1134.2155,
          -380.0,
          932.8923
        ],
        [
          1429.9999,
          -310.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 3885.108
        },
        {
          "ID": "FACADE_+1_-1_-4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_+1_-1_-5",
          "area_mm2": 1994.013
        },
        {
          "ID": "FRAME_FRONT_09",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_17",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          1134.2155,
          -380.0,
          1997.1077
        ],
        [
          1429.9999,
          -310.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 3885.107
        },
        {
          "ID": "FACADE_+1_+1_-4",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_+1_-5",
          "area_mm2": 1994.01
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_08",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_16",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          567.1077,
          -380.0,
          2564.2154
        ],
        [
          1064.2155,
          -310.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+3",
          "area_mm2": 3094.288
        },
        {
          "ID": "FACADE_+1_+1_+2",
          "area_mm2": 11879.423
        },
        {
          "ID": "FACADE_+1_+1_+1",
          "area_mm2": 11879.424
        },
        {
          "ID": "FACADE_+1_+1_+0",
          "area_mm2": 3489.716
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4900.012
        },
        {
          "ID": "FRAME_FRONT_07",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_15",
      "family": "T31",
      "group": "bastidor",
      "bounds_mm": [
        [
          -497.1077,
          -380.0,
          2930.0001
        ],
        [
          497.1077,
          -310.0,
          3000.0
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+8",
          "area_mm2": 1653.253
        },
        {
          "ID": "FACADE_+1_+1_+7",
          "area_mm2": 11879.384
        },
        {
          "ID": "FACADE_+1_+1_+6",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_+1_+5",
          "area_mm2": 5008.824
        },
        {
          "ID": "FACADE_-1_+1_+8",
          "area_mm2": 1653.253
        },
        {
          "ID": "FACADE_-1_+1_+7",
          "area_mm2": 11879.384
        },
        {
          "ID": "FACADE_-1_+1_+6",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_+1_+5",
          "area_mm2": 5008.824
        },
        {
          "ID": "LONG_FRONT_+1",
          "area_mm2": 4899.995
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_14",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          -380.0,
          2564.2154
        ],
        [
          -567.1077,
          -310.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_+3",
          "area_mm2": 3094.288
        },
        {
          "ID": "FACADE_-1_+1_+2",
          "area_mm2": 11879.423
        },
        {
          "ID": "FACADE_-1_+1_+1",
          "area_mm2": 11879.424
        },
        {
          "ID": "FACADE_-1_+1_+0",
          "area_mm2": 3489.716
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4900.012
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_13",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1429.9999,
          -380.0,
          1997.1077
        ],
        [
          -1134.2155,
          -310.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 3885.107
        },
        {
          "ID": "FACADE_-1_+1_-4",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_+1_-5",
          "area_mm2": 1994.01
        },
        {
          "ID": "FRAME_FRONT_04",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_12",
      "family": "T32",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1429.9999,
          -380.0,
          932.8923
        ],
        [
          -1134.2155,
          -310.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 3885.108
        },
        {
          "ID": "FACADE_-1_-1_-4",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_-5",
          "area_mm2": 1994.013
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_03",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_11",
      "family": "T30",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1064.2155,
          -380.0,
          365.7845
        ],
        [
          -567.1077,
          -310.0,
          435.7845
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_-1_+3",
          "area_mm2": 3094.286
        },
        {
          "ID": "FACADE_-1_-1_+2",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+1",
          "area_mm2": 11879.393
        },
        {
          "ID": "FACADE_-1_-1_+0",
          "area_mm2": 3489.701
        },
        {
          "ID": "LONG_FRONT_-1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_02",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_09",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          1064.2155,
          -380.0,
          365.7845
        ],
        [
          1134.2155,
          -310.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_-1_+0",
          "area_mm2": 8389.687
        },
        {
          "ID": "FACADE_+1_-1_-1",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_-1_-2",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_-1_-3",
          "area_mm2": 7994.28
        },
        {
          "ID": "FRAME_FRONT_18",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_DEPTH_+1_-1",
          "area_mm2": 3102.236
        },
        {
          "ID": "DEPTH_18",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_17",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_02_1",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_19",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_08",
      "family": "T34",
      "group": "bastidor",
      "bounds_mm": [
        [
          1429.9999,
          -380.0,
          932.8923
        ],
        [
          1500.0,
          -310.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_-5",
          "area_mm2": 9885.378
        },
        {
          "ID": "FACADE_+1_+1_-6",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_+1_-7",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_+1_-8",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_+1_-1_-5",
          "area_mm2": 9885.382
        },
        {
          "ID": "FACADE_+1_-1_-6",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_-1_-7",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_+1_-1_-8",
          "area_mm2": 1653.249
        },
        {
          "ID": "DEPTH_16",
          "area_mm2": 4900.003
        },
        {
          "ID": "DEPTH_15",
          "area_mm2": 4899.999
        },
        {
          "ID": "SKIN_RAIL_03_1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_18",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_17",
          "area_mm2": 4899.995
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_07",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          1064.2155,
          -380.0,
          1997.1077
        ],
        [
          1134.2155,
          -310.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_+1_+1_+0",
          "area_mm2": 8389.695
        },
        {
          "ID": "FACADE_+1_+1_-1",
          "area_mm2": 11879.367
        },
        {
          "ID": "FACADE_+1_+1_-2",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_+1_+1_-3",
          "area_mm2": 7994.276
        },
        {
          "ID": "FRAME_FRONT_17",
          "area_mm2": 4899.995
        },
        {
          "ID": "BRACE_DEPTH_+1_+1",
          "area_mm2": 3102.221
        },
        {
          "ID": "DEPTH_14",
          "area_mm2": 4899.991
        },
        {
          "ID": "DEPTH_13",
          "area_mm2": 4900.007
        },
        {
          "ID": "SKIN_RAIL_04_1",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_16",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_04",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1134.2155,
          -380.0,
          1997.1077
        ],
        [
          -1064.2155,
          -310.0,
          2634.2156
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_+0",
          "area_mm2": 8389.695
        },
        {
          "ID": "FACADE_-1_+1_-1",
          "area_mm2": 11879.367
        },
        {
          "ID": "FACADE_-1_+1_-2",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_+1_-3",
          "area_mm2": 7994.276
        },
        {
          "ID": "FRAME_FRONT_13",
          "area_mm2": 4899.995
        },
        {
          "ID": "BRACE_DEPTH_-1_+1",
          "area_mm2": 3102.221
        },
        {
          "ID": "DEPTH_08",
          "area_mm2": 4900.007
        },
        {
          "ID": "DEPTH_07",
          "area_mm2": 4899.991
        },
        {
          "ID": "SKIN_RAIL_04_0",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_14",
          "area_mm2": 4900.012
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_03",
      "family": "T34",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1500.0,
          -380.0,
          932.8923
        ],
        [
          -1429.9999,
          -310.0,
          2067.1077
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_+1_-5",
          "area_mm2": 9885.378
        },
        {
          "ID": "FACADE_-1_+1_-6",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_+1_-7",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_+1_-8",
          "area_mm2": 1653.249
        },
        {
          "ID": "FACADE_-1_-1_-5",
          "area_mm2": 9885.382
        },
        {
          "ID": "FACADE_-1_-1_-6",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_-1_-7",
          "area_mm2": 11879.403
        },
        {
          "ID": "FACADE_-1_-1_-8",
          "area_mm2": 1653.249
        },
        {
          "ID": "DEPTH_06",
          "area_mm2": 4899.999
        },
        {
          "ID": "DEPTH_05",
          "area_mm2": 4900.003
        },
        {
          "ID": "SKIN_RAIL_03_0",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_13",
          "area_mm2": 4899.995
        },
        {
          "ID": "FRAME_FRONT_12",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    },
    {
      "ID": "FRAME_FRONT_02",
      "family": "T33",
      "group": "bastidor",
      "bounds_mm": [
        [
          -1134.2155,
          -380.0,
          365.7845
        ],
        [
          -1064.2155,
          -310.0,
          1002.8923
        ]
      ],
      "contacts": [
        {
          "ID": "FACADE_-1_-1_+0",
          "area_mm2": 8389.687
        },
        {
          "ID": "FACADE_-1_-1_-1",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_-1_-2",
          "area_mm2": 11879.383
        },
        {
          "ID": "FACADE_-1_-1_-3",
          "area_mm2": 7994.28
        },
        {
          "ID": "FRAME_FRONT_12",
          "area_mm2": 4899.999
        },
        {
          "ID": "BRACE_DEPTH_-1_-1",
          "area_mm2": 3102.236
        },
        {
          "ID": "DEPTH_04",
          "area_mm2": 4899.995
        },
        {
          "ID": "DEPTH_03",
          "area_mm2": 4899.995
        },
        {
          "ID": "SKIN_RAIL_02_0",
          "area_mm2": 4899.999
        },
        {
          "ID": "FRAME_FRONT_11",
          "area_mm2": 4899.999
        }
      ],
      "geometry_status": "Contactos de caras registrados; geometría de origen v15 sin colisiones de madera en su auditoría",
      "access_status": "Inspección particular pendiente",
      "method_proposed": "Unión lateral o placa superficial con tornillos a fibra lateral; H3 enesquinas según apoyo",
      "resistance_status": "No calculada",
      "fastening_status": "No liberada; ficha de fijación y material real pendientes",
      "related_access_probes": []
    }
  ],
  "sources": [
    {
      "title": "Rothoblaas Minimum distances guide",
      "url": "https://www.rothoblaas.com/attachments/295904/minimum-distances-guide-en.pdf",
      "use": "Distancias dependen de diámetro, punta, pretaladro, especie y dirección de carga; no trasladar una tabla a H3 artesanal sin verificación."
    },
    {
      "title": "Simpson Strong-Tie Product Installer’s Guide",
      "url": "https://www.strongtie.com/resources/product-installers-guide/landing",
      "use": "Los conectores se montan con las fijaciones y configuración especificadas para cada producto."
    }
  ]
}